AlarmSense PLUS 4 Zone

Product code: ASP-4

4 zone fire alarm control panel for use with the Apollo Fire Detector's 'AlarmSense' range of 2 wire devices. Expandable to 12 zones, suitable for fully functional repeater panel

Up to 4 zonesRepeaters

Where to buy
SKU: ASP-4 Category: Brand: AlarmSense PLUS

Product Features

  • 4 x AlarmSense zones
  • Compatible with Apollo AlarmSense range of devices
  • Activate controls via key switch or code entry
  • Integral detector removal monitoring
  • 3 Amp switch mode power supply Nom 27V DC
  • 2 x conventional monitored sounder outputs
  • 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free
  • Class change I/P
  • Alert I/P
  • Fire & fault switched -ve outputs
  • Test mode, with or without sounders
  • Disable zones, sounder O/Ps, aux O/Ps & delays
  • Conventional sounder circuits are fused @ 500mA with resettable fuses
  • Fully functional repeater available

Technical Specifications

Enclosure1.2mm Mild Steel IP30. Colour ref: MW334E Interpon powder coat
Cable EntryVia 20mm knockouts located in the top and rear of the cabinet
DimensionsBack box: 450mm W x 300mm H x 85mm D, Lid: 460mm W x 310mm H x 25mm D
Mains Supply3A internal switch mode power supply, Nom 27v DC
Battery Capacity2 x 7.0Ah 12v VRSLA
Detection Zones4 x AlarmSense protocol. EOL = 3K3R
Sounder Circuits2 x conventional monitored, fused @500mA. EOL = 3K3R
On Board Relays1 x Fire, 1 x Fault, 3A, 30v volt free changeover
Outputs1 x Fire, 1 x Fault 40mA switch -ve outputs
Switch InputsClass change & alert (pulsing)
Event Log40 event history
Non Priority AlarmSelectable per zone
Coincidence AlarmSelectable per zone

Technical Specification

Product Downloads

The following downloads are available for this product:
Image of Esento LogoImage of AlarmSense LogoImage of AOV LogoImage of Esento Marine LogoImage of AlarmSense PLUS LogoImage of Esprit Logo