Esento Eclipse 2 Zone Conventional or Twin Wire

Product code: ECL-2

2 zone Esento Eclipse fire alarm control panel. Eclipse panels provide a range of our most popular programming features including; false alarm management, Twin Wire mode and non latching zones. (N.B. No networking or repeater panels)

Up to 2 zonesTwin WireLPCB-810a

Where to buy
SKU: ECL-2 Category: Brand: Esento

Product Features

  • 2 zones
  • Twin Wire selection by DIL switch
  • Activate controls via key switch or code entry
  • Integral detector removal monitoring
  • 1.25 Amp switch mode power supply Nom 27V DC
  • 2 monitored sounder outputs
  • 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free
  • Class change I/P
  • Alert I/P
  • Fire & fault switched -ve outputs
  • False alarm mode
  • Test mode, with or without sounders
  • Disable zones, sounder O/Ps & aux O/Ps
  • Alarm load, 800mA shared between all sounder outputs
  • All sounder circuits are fused @ 500mA with resettable fuses.

Technical Specifications

Enclosure1.2mm Mild Steel IP30. Colour ref: MW334E Interpon powder coat
Cable EntryVia 20mm knockouts located in the top and rear of the cabinet
DimensionsBack box: 300mm W x 250mm H x 80mm D, Lid: 308mm W x 260mm H x 23mm D
Mains Supply1.25A internal switch mode power supply, Nom 27v DC
Battery Capacity2 x 3.2Ah 12v VRSLA
Detection Zones2 x conventional or Twin Wire. EOL = 4K7R
Sounder Circuits2 x monitored, fused @500mA. EOL = 4K7R
Twin WireSelectable in panel
On Board Relays1 x Fire, 1 x Fault, 3A, 30v volt free changeover
Outputs1 x Fire, 1 x Fault 40mA switch -ve outputs
Switch InputsClass change & alert (pulsing)
Intrinsically Safe ModeSelectable per zone
False Alarm ManagementType A dependency mode, approved by LPCB

Technical Specification

Product Downloads

The following downloads are available for this product:
Image of Esento LogoImage of AlarmSense LogoImage of AOV LogoImage of Esento Marine LogoImage of AlarmSense PLUS LogoImage of Esprit Logo