Haes Technologies > Products > Conventional > Control Panels > Esento Evoque 16 Zone Conventional

Esento Evoque 16 Zone Conventional

Product code: XL32-16

16 zone Esento Evoque fire alarm control panel. Evoque panels are our large zone format range and provide a generous selection of programmable features, inputs and outputs. Fully networkable up to 8 control panels, 3 false alarm management modes and fully functional repeater panels. (N.B. No Twin Wire mode)

View Product Details
Up to 16 zonesNetworkingRepeatersLPCB-810a
Where to buy
SKU: XL32-16 Category: Brand: Esento

Product Features

  • 16 zones
  • Network up to 8 control panels
  • Activate controls via key switch or code entry
  • Integral detector removal monitoring
  • 5 Amp switch mode power supply Nom 27V DC
  • 4 monitored sounder outputs
  • 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free
  • Class Change, Alert, Silence Alarms & Reset switched -ve inputs
  • Fire, Fault, Disablement & Reset, programmable switched -ve outputs
  • Program delays to outputs
  • False alarm modes A, B & C
  • Test mode, with or without sounders
  • Disable zones, sounder O/Ps, aux O/Ps & delays
  • Fire alarm routing output programmable option
  • Alarm load, 4.25A shared between all sounder outputs
  • All sounder circuits are fused @ 500mA with resettable fuses
LPCB-810a

Technical Specifications

Enclosure1.2mm Mild Steel IP30. Colour ref: MW334E Interpon powder coat
Cable EntryVia 20mm knockouts located in the top and rear of the cabinet
DimensionsBack box: 450mm W x 400mm H x 130mm D, Lid: 465mm W x 410mm H x 25mm D
Mains Supply5A internal switch mode power supply, Nom 27v DC
Battery Capacity2 x 18Ah 12v VRSLA
Detection Zones16 x conventional. EOL = 4K7
Sounder Circuits4 x monitored, fused @500mA. EOL = 4K7
NetworkingUp to 8 control panels, fault tolerant RS485 communication, requires TPCA05 network card
On Board Relays2 x programmable, 3A, 30v volt free changeover
Programmable Outputs4 x programmable 40mA switch -ve outputs
Switch InputsClass change, alert (pulsing), silence alarms & reset
Event Log40 event history
Intrinsically Safe ModeSelectable per zone
False Alarm ManagementType A, B & C dependency modes, approved by LPCB
Delay TimerOn board programmable delay timer 1-10 mins

Technical Specification

Product Downloads

The following downloads are available for this product:
Evoque Instruction Manual Asset 38
Evoque Sales Leaflet Asset 38
Evoque Technical Data Sheet Asset 38
Evoque CPR Certificate Asset 38
LPCB Certificate of Product Approval Asset 38
Esento Evoque Declaration of Conformity Asset 38
Esento Evoque Declaration of Performance Asset 38
Load more documents

Related products

Image of Esento LogoImage of AlarmSense LogoImage of AOV LogoImage of Esento Marine LogoImage of AlarmSense PLUS LogoImage of Esprit Logo